Performance Enhancement of CPV Systems Using Hybrid PCM-Nanoparticle Cooling and Thermoelectric Generator Integration
DOI:
https://doi.org/10.53893/ijmeas.v4i1.475Keywords:
CPVT System, Cooling System, Thermoelectric Generator, PCM, SWCNT, Parabolic ReflectorAbstract
Solar photovoltaic (PV) systems are rapidly being employed as a sustainable energy option, although their efficiency remains highly reliant on operating temperature and surface conditions. High heat accumulation and dust deposits are significant factors in reducing energy conversion efficiency, resulting in lower power output and a shorter module life. To overcome these issues, this study provides an improved solar energy collection strategy that combines light concentration helped by reflectors with an integrated cooling technique based on phase change materials (PCM) and thermoelectric energy recovery. The technology is intended to minimize cell temperature while also limiting efficiency losses caused by environmental exposure and capturing excess heat energy that would otherwise be lost. The evaluation focused on temperature behaviour, electrical output enhancement, and the impact of dust under various working scenarios. The results reveal that PCM integration considerably helps to stabilise panel temperature, whereas the inclusion of a larger surface area increases heat cooling more effectively. When dust is present, performance suffers dramatically, emphasising the significance of surface cleaning and cooling measures. Overall, this integrated system produces more power than typical PV modules, making it more efficient and reliable for long-term use. This approach emphasises the possibility of hybrid passive-active cooling solutions and dust reduction to aid in the application of sustainable solar technology in real-world situations.
Downloads
References
B. Belgasim, Y. Aldali, M. J. R. Abdunnabi, G. Hashem, and K. Hossin, “The potential of concentrating solar power (CSP) for electricity generation in Libya,” Renew. Sustain. Energy Rev., vol. 90, no. March, pp. 1–15, 2018, doi: 10.1016/j.rser.2018.03.045.
B. Maqdis, A. Pranata, M. Dwi, and A. Putra, “Mekanika: Jurnal Teknik Mesin Analisis Dampak Penggunaan Energi Fosil Terhadap Kualitas Udara Dan Peluang Implementasi Energi Terbarukan Di Indonesia,” vol. 11, pp. 4–9, 2025.
H. Tjiwidjaja and R. Salima, “Dampak Energi Fosil Terhadap Perubahan Iklim Dan Solusi Berbasis Energi Hijau,” vol. 2, no. 2, pp. 166–172, 2023.
R. F. Irnawan and Y. I. Masjud, “Energy transition: Utilization of solar energy as an energy source in smart building implementation as an effort to reduce the use of fossil energy,” vol. 1, no. 2, pp. 110–118, 2024.
A. A. Sasmanto, T. Dewi, and Rusdianasari, “Eligibility Study on Floating Solar Panel Installation Over Brackish Water in Sungsang, South Sumatra,” vol. 8, no. 1, pp. 240–255, 2020.
P. Caldas, M. S. Silva, E. A. Torres, and F. A. Torres, “Hybrid CSP / PV Solar Systems for Sustainable Power Generation in Brazil: A Techno-Economic Perspective,” pp. 1–22, 2025.
S. Nurjanah, T. Dewi, and Rusdianasari, “Dusting and Soiling Effect on PV Panel Performance: Case Study Open-pit Mining in South Sumatra, Indonesia,” 2025.
H. Satria, D. Maizana, and I. Dayana, “Optimization of parabolic photovoltaic and solar thermal tracker model systems using heat transfer fluid,” vol. 14, no. 3, pp. 1656–1666, 2025, doi: 10.11591/eei.v14i3.8988.
B. Junianto, T. Dewi, and C. R. Sitompul, “Development and Feasibility Analysis of Floating Solar Panel Application in Palembang, South Sumatra Development and Feasibility Analysis of Floating Solar Panel Application in Palembang, South Sumatra,” 2020, doi: 10.1088/1742-6596/1500/1/012016.
P. Dian Fauzi, R. D. Kusumanto, and A. Hasan, “Hybrid Passive Cooling System for Rooftop Photovoltaics with Varying Height Clearances,” vol. 5, no. 2, pp. 13–21, 2025.
P. Jha, B. Das, R. Gupta, J. D. Mondol, and M. A. Ehyaei, “Review of recent research on photovoltaic thermal solar collectors,” Sol. Energy, vol. 257, pp. 164–195, 2023, doi: https://doi.org/10.1016/j.solener.2023.04.004.
M. Adjie Suseno, A. Taqwa, and C. R. Sitompul, “Immersion Cooling and Heatsink System Using Mineral Oil for Enhancing Efficiency and Performance of Polycrystalline and Monocrystalline Solar Panels Email address: To cite this article:” vol. 4, no. 3, pp. 23–30, 2024.
M. A. Amidu, M. Ali, A. K. Alkaabi, and Y. Addad, “OPEN A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications,” Sci. Rep., no. 0123456789, pp. 1–13, 2023, doi: 10.1038/s41598-023-34907-0.
M. Syazwan, B. Aziz, A. Ibrahim, M. Amir, and A. Bin, “Energy performance evaluation of a photovoltaic thermal phase change material (PVT-PCM) using a spiral flow configuration,” vol. 12, no. 5, pp. 952–958, 2023.
S. Saravanakumar and S. R. Ruban, “Heating, Cooling and Power Provision in Buildings,” 2023.
O. K. Ahmed, S. Algburi, R. W. Daoud, H. Khaoula, Z. H. Ali, and E. F. Aziz, “Energy Conversion and Management: X Performance of the solar distillation systems integrated with PV / thermal systems: a review,” Energy Convers. Manag. X, vol. 27, no. August, p. 101212, 2025, doi: 10.1016/j.ecmx.2025.101212.
S. Khanjani, S. Khanmohammadi, and H. A. Chaghakaboodi, “Performance Enhancement of a Conventional Solar Still Using a Cylindrical Solar Water Heater and Cu/Al2O3 Hybrid Nanofluid: A Sustainable Approach to Water Purification.,” Water Environ. Res. a Res. Publ. Water Environ. Fed., vol. 97, no. 8, p. e70163, Aug. 2025, doi: 10.1002/wer.70163.
R. Nasrin, N. A. Rahim, H. Fayaz, and M. Hasanuzzaman, “Water/MWCNT nanofluid based cooling system of PVT: Experimental and numerical research,” Renew. Energy, vol. 121, pp. 286–300, 2018, doi: https://doi.org/10.1016/j.renene.2018.01.014.
C. Zhao, Y. Wang, M. Li, and W. Du, “Heat transfer performance investigation on a finned tube adsorbent bed with a compound parabolic concentrator (CPC) for solar adsorption refrigeration,” Appl. Therm. Eng., vol. 152, pp. 391–401, 2019, doi: https://doi.org/10.1016/j.applthermaleng.2019.02.063.
K. H. Kumar, A. M. Daabo, M. K. Karmakar, and H. Hirani, “Solar parabolic dish collector for concentrated solar thermal systems: a review and recommendations,” Environ. Sci. Pollut. Res., vol. 29, no. 22, pp. 32335–32367, 2022, doi: 10.1007/s11356-022-18586-4.
Rubitherm, “RT35HC,” 2020.
T. Okamkpa, J. Okechukwu, D. Mbachu, and C. Mgbemene, “Performance Analysis of a Photovoltaic System with Thermoelectric Generator and Phase Change Material; An Experimental Approach”.
A. M. Alinia and M. Sheikholeslami, “Development of a new solar system integrating photovoltaic and thermoelectric modules with paraffin-based nanomaterials,” 2025.
M. R. Mohammad, D. S. Ahmed, and M. K. A. Mohammed, “ZnO/Ag Nanoparticle-Decorated Single-Walled Carbon Nanotubes (SWCNTs) and Their Properties,” Surf. Rev. Lett., vol. 27, no. 03, p. 1950123, 2020, doi: 10.1142/S0218625X19501233.
J. Chiew, C. S. Chin, W. D. Toh, Z. Gao, and J. Jia, “Low-temperature macro-encapsulated phase change material based thermal energy storage system without air void space design,” Appl. Therm. Eng., vol. 141, pp. 928–938, 2018, doi: https://doi.org/10.1016/j.applthermaleng.2018.06.060.
A. Salari, A. Parcheforosh, A. Hakkaki-Fard, and A. Amadeh, “A numerical study on a photovoltaic thermal system integrated with a thermoelectric generator module,” Renew. Energy, vol. 153, pp. 1261–1271, 2020, doi: https://doi.org/10.1016/j.renene.2020.02.018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Authors and Publisher
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
