Design Manufacture of Fixture Fire Fighter Kit
DOI:
https://doi.org/10.53893/ijrvocas.v1i3.58Keywords:
Fire, Fixture, Fighter, Ergonomic, kitAbstract
Forest fires are one that needs attention in Indonesia. Due to spent a lot of money to solve this problem. One of the tools to solve this problem is fire fighter, so in case is need to make the fixture can manufacture the fire fighter kit. In this study, we propose the fixture that can be produce the kit. It call fixture fire fighter kit. Autodesk inventor is applied in the simulation design and also it is considering with the ergonomic for the worker especially the Indonesian male. Finally, this tool can be resistant with load 50 kg, the deflection is 0.831 mm, and the maximum von misses stress is 34.12 MPa.
References
….., “Kerugian Kebakaran Hutan dan Lahan Sepanjang 2019 Capai Rp 75 Triliun”, https://bnpb.go.id/berita/kerugian-kebakaran-hutan-dan-lahan-sepanjang-2019-capai-rp-75-triliun, retrieved on October 10, 2021.
K. Venkatarama., “Design of Jigs, Fixtures and Press Tools”, John Wiley & Sons Ltd, West Sussex, United Kingdom, 2015
E. Hady, , “Jig and Fixture” https:// www.kompasiana.com/1991/55008c1aa3331130725112d6/jig-dan-fixture, retrieved on October 10, 2020
M. W. Wang, C. H. Chen, F. Arifin, and J.J Lin, “Modeling and analysis of multi-shot injection molding of Blu-ray objective lens”, Journal of Mechanical Science and Technology vol. 32 ed.10 hal. 4839~4849, DOI 10.1007/s12206-018-0932-z, Jun. 2018
M. W Wang., F.Arifin, J. Y. Huang. “Optimization of The Micro Molding of A Biconcave Structure. International Journal of Technology” 10(2): 269-279. 2019
M. W Wang., F.Arifin, H. L. Kuo ,”Study on micromoulding of a high viewing angle LED lens”. Plastics, Rubber and Composites, DOI: 10.1080/14658011.2019.1685803, 2019
F. Arifin, D. Arnoldi, E. Sundari, F. Putri, F. Agasa, Y. Ramadhan, G. Susetyo, Y. D, Herlambang, “Study of strength analysis simulation of Jig and Fixture 45 degree bore”, Jurnal Polimesin. Vol. 18, No. 2, DOI: http://dx.doi.org/10.30811/jpl.v18i2.1837, 2020
M Kamal, F. Arifin, Rusdianasari, “Analysis of the Performance of The Four-Blade Darrieus Wind Turbine at the Jamik Bukit Asam Mosque Complex Tanjung Enim South Sumatra”, International Journal of Research in Vocational Studies (IJRVOCAS), Print ISSN 2777-0168, Online ISSN 2777-0141, DOI: https://doi.org/10.53893/ijrvocas.v1i2.52
O. Irawan, Y. Bow, R.D. Kusumanto,“Simulation and Performance Test Giromill Type Wind Turbine; Case Study Muara Enim, South Sumatra, Indonesia ”, International Journal of Research in Vocational Studies (IJRVOCAS), Print ISSN 2777-0168, Online ISSN 2777-0141, DOI: DOI: https://doi.org/10.53893/ijrvocas.v1i2.10
A. Garmana, F. Arifin, Rusdianasari, “CFD Analysis for Combination Darrieus and Savonius Turbine with Differences in the Number of Savonius Turbine Blades,” International Conference on Artificial Intelligence and Mechatronics Systems (AIMS), 2021.
Hasbullah, H., Kholil, M., Santoso, D. A., “Analisis Kegagalan Proses Insulasi Pada Produksi Automotive Wires (AW) Dengan Metode Failure Mode and Effect Analysis (FMEA) Pada PT JIC”, Jurnal Sinergi Vol. 21, No.3, hal. 193-203, DOI:doi.org/10.22441/sinergi.2017.3.006, 2017
……, “What is the average hand size?”, https://www.medicalnewstoday.com/articles/average-hand-size#adults retrieved October, 26, 2021
…….., “Ranked: The countries with the shortest people in the world”, https://www.insider.com/shortest-people-in-world-by-country-2019-6#12-malawi-15831cm-5-feet-232-inches-14 retrieved October, 26, 2021
…….., “Welding Calculator”, https://www.omnicalculator.com/construction/welding retrieved October, 10, 2020
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Wirda Novarika, Fatahul Arifin, Eka Satria Martomi, Indra Gunawan, Fathur Raihan Perdana
This work is licensed under a Creative Commons Attribution 4.0 International License.
