Design Simulation of Upper Arm on Welding Table
DOI:
https://doi.org/10.53893/ijmeas.v1i1.215Abstract
Welding process is the joining of two metals by heating. There are two types of welding that are often applied in the field, namely gas welding (OAW) and electric welding (SMAW). Both of them have their advantages as metal connectors. This research originated from a problem that occurred in the upper arm on the welding table which experienced bending as a result of carrying the load when holding the welding disc. Therefore, CAD/CAE design is carried out. In this case, the strength and tension that occur in the upper arm are analyzed. This research aims to reveal the value of the stress that occurs in the upper arm and the safety value. Where in the design the planned force capacity is 300 newtons using the finite element method or also known as Finite Element Analysis (FEA). And the material used is ASTM A36. The results of the simulation and also the analysis that has been carried out show that the upper arm frame structure on the welding table has a stress, deformation, and safety factor of 311.987 MPa, 2.28286 mm, and 0.663488 ul.
Downloads
References
. Rober D, C. (2007). Konsep Dan Aplikasi Metode Elemen Hingga.
. Bargess, M. F., Lesmana, C., Tallar, R. Y., Sipil, J. T., Maranatha, U. K., Prof, J., Suria, D., & Mph, S. (2000). Dengan Metode Elemen Hingga
. Arifin, F., Arnoldi, D., Sundari, E., Putri, F., Agassa, F., Susetyo, G., Herlambang, Y. D. 2020, Studi analisis simulasi kekuatan beban pada alat bantu pembuatan lubang dengan sudut kemiringan 45 derajat, jurnal Polimesin, 18 (2) pp., 116-123, http://dx.doi.org/10.30811/jpl.v18i2.1837
. Novarika, W., Arifin, F., Satria Martomi, E., Gunawan, I. ., & Perdana, F. R. . (2021). Design Manufacture of Fixture Fire Fighter Kit. International Journal of Research in Vocational Studies (IJRVOCAS), 1(3), 08–16. https://doi.org/10.53893/ijrvocas.v1i3.58
. Wang, M., W., Arifin, A., Huynh, T.T.N., (2019), Optimalization of Molding Parameter for a Micro gear with Taguchi Method, Journal of Physics: Conceferece Series 1167(1), doi:10.1088/1742-6596/1167/1/012001
. Herlambang, Y., D., Supriono, Prasetiyo, B., Alfauzi A., S., Marliyati, Purwanto, Arifin, F., Emzain F., Z., 2023, Optimization of Savonius Turbine Towards Different Innner Blade Position to Improve Turbine Performance, Jurnal Polimesin, 20 (1), pp 112-117, ttp://dx.doi.org/10.30811/jpl.v21i1.3248
. Ari, L., & Wibawa, N. (2021). Simulasi Kekuatan Komponen Sarana Pengujian Roket Menggunakan Autodesk Inventor Professional 2017.
. Seprianto, D., and Arifin, A., (2010), “Dasar-Dasar Solid Modeling Menggunakan Autodesk Inventor Professional 2010”, Tunas Gemilang Press, ISBN: 978-602-8816-35-9
. Susanto, Dwi Nugroho, Setyaningrum, Ratih (2015) Analisis dan Perancangan Meja Las dengan Pendekatan Ergonomi dan QFD, https://publikasiilmiah.ums.ac.id/handle/11617/5741
. .Astanto, I., Arifin, F.., Bow, Y., & Sirajuddin. (2022). Study of Effect Changing the Blade Shape and Lift Angles on Horizontal Wind Turbine. International Journal of Research in Vocational Studies (IJRVOCAS), 2(1), 33–37. https://doi.org/10.53893/ijrvocas.v2i1.92
. Arifin, F., Sutanto, H. ., Iskandar, I. ., & Sukwadi, R. . (2022). The Design and Fabrication of Waterwheels with System Floating Pontoon. International Journal of Research in Vocational Studies (IJRVOCAS), 2(3), 01–06. https://doi.org/10.53893/ijrvocas.v2i3.143
. Danurji, Fawaid, Haryadi. (2015) Rancang Bangun Meja Las Untuk Variasi Posisipengelasan.6971-16281-1-SM%20(1).pdf
. Komarudin, Towip. (2022) Perancangan Meja Las Yang Ergonomis Berdasarkan Analisis Reba di Universitas Sebelas Maret 60068-184380-1-PB.
. Uji, B., Antariksa, P., Penerbangan, L., & Lapan, N. (2018). Pengaruh Kecepatan Landing Vertikal Terhadap Menggunakan Metode Elemen Hingga. 35–42.
. Wibawa, lasinta ari nendra., (2017). Simulasi Kekuatan Komponen Sarana Pengujian Roket Menggunakan Autodesk Inventor Provesional
. Lee, Seung-Heon, Si-Woo Song, Min-Jae Jeong, Won-Ho Kim, and Dong-Hoon Jung. (2023). "A Novel Sleeve Design to Reduce the Eddy Current Loss of High-Speed Electrical Machines" Machines 11, no. 7: 756. https://doi.org/10.3390/machines11070756
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Fatahul Arifin, Azharuddin, Dwi Arnoldi, Sairul Effendi, Yusuf Dewantoro Herlambang, Yahya, Muhammad Arif Fadilah, Akhmad Radjiq
This work is licensed under a Creative Commons Attribution 4.0 International License.
