Development of IoT Based Clothesline using Microcontroller
DOI:
https://doi.org/10.53893/ijmeas.v1i1.217Keywords:
Clothesline automatic, blynk, LDR sensor, rain sensorAbstract
Sunlight has long been used in daily activities, especially drying clothes. The only concern is sudden rain and people are not aware that their clothes are still on the clothesline. Due to this, many opt to dry their clothes indoor, which takes longer to dry. With regard to the aforementioned issue, in this research, Internet of Things (IoT) concept is applied in the production of automatic clotheslines by the integration of weather monitoring and forecasting with automatic clothesline. This automatic clothesline has an LDR sensor and a rain sensor to detect light and raindrops in the environment, then the values obtained from these two sensors are processed by the microcontroller to control the DC motor that can moves the clothes inside and outside from the sensors system which can be monitored and controled via smartphone using the Blynk app. The outcome of this research is an automatic clothesline prototype that is accessible through the Blynk app; utilising LDR sensors, rain sensors, and motor to retrieve clothes.
Downloads
References
. McGrath, M. (2020, January 16). Dekade terakhir menjadi rekor terpanas, namunsuhu tahun ini diperkirakan lebih tinggi lagi. Diambil kembali dari BBC NEWS Indonesia: https://www.bbc.com/indonesia/dunia-51131111, access time 27 Sept 2022 21:20 WIB
. E. Rismawan, S. Sulistiyanti, and A. Trisanto. “Rancang Bangun Prototype Penjemur Pakaian Otomatis Berbasis Mikrokontroler Atmega8535” VOLUME 1 NO 1 , JANUARI 2012. ISSN 2303-0577
. R. L. Kahimpong, M. Umboh, and B. Maluegha. “Rancang Bangun Penggerak AlatJemur Pakaian Otomatis Berbasis Arduino Uno Atmega328,”
. Y. Siska . (2021). “Rancang Bangun Prototipe Penjemur Otomatis berbasisMikrokontroller Arduino Uno”.
. A. Dendi, P. Yani. (2021). “Prototipe Jemuran Otomatis dengan Sensor Hujan, LDRBerbasiskan Arduino Uno R3 dan Sistem Monitoring Menggunakan Aplikasi Blynk”
. H. Siswanto F Riza, Arviena “Rancang desain Aplikasi jemuran otomatis berbasis arduiono”
. Murhadi, W. Sari Y. Irawan “Prototype jemuran otomatis menggunakan sensor raindrop dan sensor LDR berbasis Arduino Nano”
. D. indriyani, E. Apriaskar, Djunaidi. (2019). “Sistem jemuran otomatis menggunakan mikrokontroller berbasis Arduino”
. J. Prasetyo. (2019). “system pengedalian jemuran pakaian berbasis internet of things”.
. V. V. Simanjuntak. (2017). “Analisis Dc Motor Pada Aplikasi Parkir Vertikal Otomatis Menggunakan RFID”. Polsri.ac.id.
. M. Asy’ari., M. F. Rohmah, Sugianto. (2022). “Rancang bangun atap jemuran otomatis untuk smart home berbasis IOT”.
. F. Arif, Rahman. (2020). “Sistem detector dan monitoring curah hujan terintegrasi system kendali jemuran berbasis inter of things”.
. Saleh. (2022). “Internet of things (IoT): Concepts, issues, challenges and perspectives”. 2018. Challenges Internet Things Tech. Use, Ethics, no. 19890, pp. 1–26, doi: 10.1002/9781119549765.ch1.
. D. Aziz. (2018).“Webserver Based Smart Monitoring System Using ESP8266 Node MCU Module,” Int. J. Sci. Eng. Res., vol. 9, no. 6, p. 801.
. Erintafifah. (2021). “Mengenal Perangkat Lunak Arduino IDE”. https://www.kmtech.id/post/mengenal-perangkat-lunak-arduino-ide , access time 26 Sept 2022 21:13 WIB
. M. Artiyasa, A. Nita Rostini, Edwinanto, dan A. P. Jinfithrana (2021). “Aplikasi Smart Home Node Mcu Iot Untuk Blynk”, J. Rekayasa Teknol. Nusa Putra, vol. 7, no. 1, pp. 1–7, doi: 10.52005/rekayasa. v7i1.59.
. W. Alexander. (2021). “Penerapan Mesin Penyuling Asap Cair berbasis Teknologi Refrijerasi di Desa Tanjung Lago Kabupaten Banyuasin”. Jurnal Austenit. 17(1), 28-33.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Muhammad Asyraf Zulkipli, Khairul Huda Yusof, Almadora Anwar sani, Muhammad Auzi Herizal
This work is licensed under a Creative Commons Attribution 4.0 International License.
