Geometric Design for Damar Wulan Road Deli Serdang Regency
DOI:
https://doi.org/10.53893/ijrvocas.v2i4.174Keywords:
Design, Alinement, Vertical, Road, GeometricAbstract
Damar Wulan Road is one of the 3.5 km road sections located in Sampali Village, Percut Sei Tuan District, Deli Serdang Regency. This road has the potential to be an access to a strategic location, but there are still few people who use Damar Wulan Road as a mobilization route because most of the road is still subgrade. Therefore, it is necessary to design the Damar Wulan Road so that it can be used by the community. This study aims to design vertical alignment for Damar Wulan Road. The method used for vertical alignment design is TPGJAK 1997. The calculation on the vertical alignment obtained results in the form of 16 PVI arches, which are 8 convex vertical curves and 8 concave vertical curves.
References
T. Triyono, A. Mudianto, and H. Purwanti, “PERBANDINGAN PERENCANAAN GEOMETRIK JALAN MENGGUNAKAN APLIKASI AutoCAD Civil 3D DENGAN METODE BINA MARGA (Studi kasus : Ruas Jalan Bangunrejo – Wates, Provinsi Lampung),” J. Online Mhs. Bid. Tek. Sipil, vol. 1, no. 1, pp. 1–12, 2019.
I. Susan, R. Azis, and A. Aning Yustica Sari, “Evaluasi Alinemen Vertikal Pada Ruas Jalan Desa Timbong Kecamatan Banggai Tengah Kabupaten Banggai Laut,” J. Perad. Sains, Rekayasa dan Teknol., vol. 8, no. 2, pp. 111–120, 2020, [Online]. Available: https://stitek-binataruna.e-journal.id/radial/article/view/208/198.
DEPARTEMEN PEKERJAAN UMUM BADAN PEMBINAAN KONSTRUKSI DAN SUMBER DAYA MANUSIA PUSAT, “Pelatihan Road Design Engineer Modul Rde - 10 : Perencanaan Geometrik Jalan,” pp. 1–65, 2005.
Direktorat Jenderal Bina Marga, “Guidelines for Inter-City Road Geometric Planning Procedures,” Tata Cara Perenc. Geom. Jalan Antar Kota, no. 038, p. 54, 1997.
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Tetra Oktaviani, Falwan Rizky Gunawan
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.