Tensile Strength of S45C Steel Material for SMAW Welding with Various Cooling Media
DOI:
https://doi.org/10.53893/ijrvocas.v3i4.1Keywords:
Welding SMAW, Oil Coolent, Water Coolent, Tensile TestAbstract
One of the welding methods that is widely used is the SMAW welding process (Shield Metal Arc Welding) which is also called Electric Arc Welding. This research aims to analyze the effect of variations in cooling media on tensile test results on welding results of S45C steel material. This research uses S45C material. The material is subjected to single vee joint welding, where at the completion of welding the material is immersed in a cooling medium of oil, water, air and is not treated in this research. From the research results, it can be concluded that the highest ultimate tensile strength (Tu) value is when the material is cooled with oil media, where the highest value is 517.15 N/mm2, followed by air cooling media, where the highest value is amounted to 475.85 N/mm2, and the lowest was with water cooling media where the highest value was 455.50 N/mm2. Thus, cooling with oil as a medium is the best between the two cooling media, water and air.
References
Alexander Sebayang, Efrata Tarigan, Sihar Siahaan (2021) “Analisa Perbandingan Kekuatan Tarik Hasil Pengelasan Plat Baja St 37 Dengan Menggunakan Metode Pengelasan Shielded Metal Arc Welding (Smaw) Dan Metal Inert Gas (Mig) Menggunakan Arus 140 A Dan 120 A” Jurnal Ilmiah Core it vol. 9 no. 6 e-issn: 2548-3528 p-issn: 2339-1766
Sugestian, M Rizsaldy. (2019). Analisa kekuatan sambungan las smaw horizontal down hand pada plate baja jis 3131sphc dan stainless steel 201 dengan aplikasi piles transfer di mesin thermoforming (stacking unit). [Skripsi] Institut Teknologi Nasional Malang
Wiryosumarto, H. dan Okumura, T. Teknologi Pengelasan Logam. 2000. Jakarta, PT. Pradya Paramita Taufik Akbar, Budie Santosa, (2012). Analisa Pengaruh dari Welding Sequence Terhadap Tegangan Sisa dan Deformasi Pada Circular Patch Weld Double Bevel Butt-Joint Plat ASTM A36 Menggunakan Metode Element Hingga. JURNAL TEKNIK ITS Vol. 1, No. 1(Sept. 2012) ISSN: 2301- 9271: 352 – 357
Analisa Gaya Tarik Terhadap Pelat Baja AISI 1045 pada Sambungan Las Metal Inert Gas (MIG) dengan Variasi Arus 80 A, 100 A, 120 A dan 140 A, Jurnal Ilmiah Core IT Vol. 9 No. 6 e-ISSN: 2548-3528 p-ISSN: 2339-1766
Arifin J, Purwanto H, Syafa’at I. (2017). Pengaruh jenis elektroda terhadap sifat mekanik hasil pengelasan smaw baja ASTM A36. Momentum, 13(1), 27–31
Budiarsa, I. N. (2008). Pengaruh besar arus pengelasan dan kecepatan volume alir gas pada proses las GMAW terhadap ketangguhan aluminium 5083. CAKRAM, 2(2), 112–116
Ir. Liwat Tarigan, M.T, Penulis 2 : Alexander Sebayang, S.T., M.T., Penulis 3 : Drs.Piktor Tarigan, M.Eng Analisa Gaya Tarik Terhadap Pelat Baja Aisi 1045 Pada Sambungan Las Metal Inert Gas (Mig) Dengan Arus 80 A, 100 A, 120 A Dan 140 A
Dody Prayitno, Harry Daniel Hutagalung, Daisman P.B. Aji. (2018). Pengaruh Kuat Arus Listrik Pengelasan Terhadap Kekerasan Lapisan Lasan Pada Baja ASTM A316. Jurnal Dinamika Vokasional Teknik Mesin, Volume 3, Nomor 1, 1-6.
Hamid, A. (2016). Analisa Pengaruh Arus Pengelasan Smaw Pada Material Baja Karbon Rendah Terhadap Kekuatan Material Hasil Sambungan. Jurnal Teknologi Elektro, Universitas Mercu Buana (ISSN:2086-9479), 26-36.
A. Azwinur, S. A. Jalil, and A. Husna, "Pengaruh variasi arus pengelasan terhadap sifat mekanik pada proses pengelasan SMAW,"
A. E. E8M-11, Standard Test Methods for Tension Testing of Metallic Materials. West Conshohocken: ASTM International, 2011.
O. Ikumapayi, I. P. Okokpujie, S. A. Afolalu, O. Ajayi, E. Akilabi, and O. Bodunde, "Effects of Quenchants on Impact Strength of SingleVee Butt Welded Joint of Mild Steel," in IOP Conference Series: Materials Science and Engineering, 2018, p. 012007.
E. Tarigan, A. Sebayang, L. Tarigan, B. Surbakti, and P. Tarigan, “Analysis of Tensile Strength on ST.37 Material with SMAW Welding Variations of SAE 10 Oil and Water Cooling”, IJRVOCAS, vol. 2, no. 4, pp. 20–24, Jan. 2023.
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Alexander Sebayang, Efrata Tarigan, Liwat Tarigan, Berta Ginting, Achmad Irianto
This work is licensed under a Creative Commons Attribution 4.0 International License.
